Re: 2 Mile Challenge

veryone likes a good challenge .Such as the Fizzy or filling the Matrix challenges. We decided that we would put out a challenge based on 2 Miles and elevation. To complete the challenge you will need to have a logged a cache every 100 feet starting from 0 to 10,560 ft in elevation. Below is an example. For this challenge previous logs do count you can use any of the following types of caches: EC, Traditional, Wherigo, Virtual, Mystery, Letterbox, Event or Multi. The cache can be placed at any time and found at any time by you.

0-99 feet

100-199 feet

200-299 feet

300-399 feet

This process would continue with the last cache being 10,500-10599 feet. The final is at the posted coords. Use Project GC attached for you. This will require some travel but there are thousands of caches that will help meet the requirements. GC6XJC8

Here is the link to the checker http://project-gc.com/Challenges/GC6XJC8/23671

Please confirm

I had exactly the same idea about the solution of the checker for this cache, but I've been scared by number of lines of the config [:)].

Looks good but i thought i had this one according to GSAK i ran the numbers and had a cache up to over 11,000 but i think elevation can be different on systems, all it takes is a foot or 2 and you will not qualify. I think this would have a hard time getting published anyway but i will try. Have to look and make sure i have logged all my caches to.

thanks for the quick work
steve

There are little gaps in the setup , I will try a different config later today

Not a big deal i will relook at my caches when i get home and run them through gsak

thanks steve

I have tried the other config but it makes no difference in the outcome

Works good thanks for the help

steve