Re: 100,000 Feet Elevation Challenge

This is Challenge Cache , cache is at posted coords. You will need to have logged enough caches so that the elevation of the caches total 100,000 Feet. This could be done in 7-8 caches or 100’s of caches. All cache types count and locations. GC 6TFTZ.

Is this possible and on the checker could it stop when you reach the number, example we have 8 that totals the 100,000 but that is not a big deal of how many it list to us.

Thanks for all the help.

steve

The existing script only works with the following parameters:
{ "nrCountries":1, "nrCaches":10, "sumAltitude":30480}

So you have to select the number of countries, the number of caches and the total sum in meters.

What you are asking require a new script

This is Challenge Cache , cache is at posted coords. You will need to have logged 20 caches or less so that the elevation is equal to 100,000 Feet . Would this require a new script, if i use 10 caches i do not think the reviewer would pass it.

thanks steve

Here is the link for 20 caches http://project-gc.com/Challenges/GC6TFTZ/22869

Looks great thanks steve

That is not correct. There is checkers that can do that wit any number of caches
Checker i can add gccode if you what to any number of caches.
http://project-gc.com/Challenges//22877

The value is in meter since it is a generic parameter checker

You are correct but I have to put the nummer of caches at O and lowland caches are showing an extreme long list of caches because you can not put a limit anymore.